|
|
|
EcoBoost 2.3L BC GASKETS
BC gaskets are made in Japan and deliver the ultimate sealing capability even at extreme boost pressures. Individual die cut layers of stainless steel with superior consistency compared to other leading gaskets. These inferior brands are constructed with too high profile of beads which is prone to fatigue, losing the spring effect in a relatively short period of time and consistency of sealing pressure, resulting in leakage. BC gaskets are pre-coated stainless steel with a 0.2 micron consistent layer of Nitrile rubber that completely fills the cylinder head surface. Even a newly resurfaced cylinder head and/or block has a surface finish or roughness between 10 to15 microns and this Nitrile rubber completely seals the surfaces at operating engine temperatures, unlike the FKM type which is not suitable for filling the surface roughness because the material has too high of heat resistance. Basically the FKM does not melt to fill into the surface roughness providing the proper seal.
|
 |
 |
|
Part # |
|
Description # |
|
Bore |
|
Buy Now |
|
Status |
|
|
| BC8245 |
GASKETS - BC Made In Japan (Ford EcoBoost 2.3L) - 1.2mm thickness |
89mm |
 |
In-Stock |
|
|
|
ECOBOOST DARTON SLEEVES
The Darton MID™ Sleeve Kit is available for many series of 4, 6, and 8 cylinder import and domestic engines and provides for maximum bore sizes and boost potential. The benefits of our MIDseries kits are:
| Cast iron performance in an aluminum block
Improved block integral strength
Improved cooling
Kits can be installed by your local machine shop
"Wet sleeve" replace-ability
Full installation manual available on website
Increased horsepower output potential |
High boost and horsepower potential
Superior oil and compression control
Superior cylinder sealing and ring wear
Street or strip application
Bulletproof Darton ductile iron,
130,000-psi tensile strength |
|
 |
|
|
Part # |
|
Description # |
|
Darton P/N |
|
Bore Size |
|
Semi Bore |
|
O.D. |
|
Wall Thk |
|
Length |
|
Flange Thk |
|
Flange Dia |
|
Buy Now |
|
Status |
|
|
| BC8040 |
BLOCK SLEEVES - Darton M.I.D. (Ford EcoBoost) |
700-130 |
3.400” |
n/a |
3.950" |
0.203" |
5.950" |
0.500" |
4.840" |
|
In-Stock |
|
|
|
619.749.9018 ph
619.749.9128 fx
|
| Some products listed are not legal for sale or use on emission controlled motor vehicles, RPM ranges vary on application.Warranty Information Copyright © Brian Crower Inc. All rights reserved.. |
|
|
 |
WARNING: This product can expose you to chemicals,
including Chromium (hexavalent compounds), lead and lead
compounds, which are known to the State of California to
cause cancer, birth defects or other reproductive harm. For
more information, visit www.p65warnings.ca.gov |
|
 |
|
|
|
