
|
|
|
 |
3SGTE CAMSHAFTS There are four generations of the Toyota 3SGTE/3SGE, which were used in the Toyota Celica, MR2, Caldina and Altezza. All 3SGTE engines had a displacement of 2.0 L, with the 3SGTE being the performance factory turbo designation. The second generation, found in the MR2 turbo, was produced from 1990 to 1994, receiving a slight boost in horsepower and torque. It also proved to be a slightly more reliable engine. The second generation non turbo also did-away with the T-VIS system, which was replaced by the ACIS (Acoustic Control Induction System), proving to be much more efficient. T-VIS was, however, retained on the second-generation 3SGTE. The third generation 3SGTE was produced from 1994 to 1999 in the Celica and MR2. Power output was increased over the Gen 2, while torque figures stayed the same. It received a minor revision in 1996 for emissions (EGR) which reduced power output. These cams do not fit the BEAMS 3SGE 4th generation engine ("Black Top") which began production in 1997 and is equipped with VVT-i. BEAMS is an acronym which stands for Breakthrough Engine with Advanced Mechanism System. |
 |
 |
Stage |
 |
Description |
 |
Part# |
 |
Adv. Dur. |
 |
Dur @ .050 |
 |
Lift (in) |
 |
Lift (mm) |
 |
Kit# |
 |
Cam Card |
 |
Dyno |
 |
Shop |
 |
Status |
 |
 |
 |
Track/Strip Specification
Plug and play application. Short duration for nice track manners, slight lope at idle. Excellent all purpose spec. OEM spring OK. |
BC0351 |
264°/264° |
216°/216° |
.344"/.344" |
8.74/8.74 |
BC0350-2
or
BC0350 |
 |
|
 |
Out of Stock |
 |
 |
 |
Race Specification Added duration for extended RPM's, also features more lift for bigger turbo setups. Requires an aftermarket spring kit like BC0350 or BC0350-2.
|
BC0352 |
272°/272° |
222°/222° |
.400"/.400" |
10.16/10.16 |
BC0350-2 or BC0350 |
 |
|
 |
Out of Stock |
 |
 |
 |
JDM 3GSTE MR2 |
Stock |
256°/256° |
204°/204° |
.335"/.335" |
8.50/8.50 |
 |
|
 |
|
|
|
| Warning: BC0350 spring/retainer kit for use on shim under bucket only. BC0350-2 spring/retainer kit for use on shim over bucket and shimless bucket only. |
|
 |
619.749.9018 ph
619.749.9128 fx
|
| Some products listed are not legal for sale or use on emission controlled motor vehicles, RPM ranges vary on application.Warranty Information Copyright © Brian Crower Inc. All rights reserved.. |
|
|
 |
WARNING: This product can expose you to chemicals,
including Chromium (hexavalent compounds), lead and lead
compounds, which are known to the State of California to
cause cancer, birth defects or other reproductive harm. For
more information, visit www.p65warnings.ca.gov |
|
 |
|
|
|